Crystal Vision
Using the front control panel
Up-and-down-AAFD User Manual R1.22
24
17/11/2010
Selecting Up-and-down- AAFD
To select a particular card in a frame, press the DEVICE key to go to the Device menu.
Note:
There may be a delay whilst the frame is interrogated during which time the ‘No cards Found’ could be
displayed.
The top line of the display will show ‘Available Cards X’, where X is the number of cards
that have responded so far to the polling request.
Control panel showing available cards
Rotate the shaft encoder and the bottom row will display the successfully polled cards by
name and location or slot number.
In the example above, the card displayed is located in the second frame in slot number 1.
When the desired card is selected press the ENTER key to access that card’s HOME
menu. The message shows that an Up-and-down-AAFD has been selected.
Up-and-down-AAFD home menu
Updating the display
The values displayed on an active front panel are only updated when an adjustment is
made and when changing menu level. If changes occur through the use of card edge
controls or other remote control, the text displayed on the active front panel will not be
updated immediately. If necessary, use the upward arrow to leave and then re-enter a
menu to update the display.
4.1 The Up-and-down-AAFD active panel menu
structure
At any time the main top-level menu (Home) is obtained by pressing the HOME key.
From the home menu further selections can be made. Active function keys are indicated
by illuminated, integrated LEDs.
