Crystal Vision
Card edge operation
Up-and-down-AAFD User Manual R1.22
15
17/11/2010
Card edge status
From the STATUS top menu press ENTER then SCROLL to access the status menu options.
Menu
Comment
Valid video
input present
Rotate the Scroll/Adj. control to show input video status.
IP Present, IP Missing.
Input video line
rate
Rotate the Scroll/Adj. control to show input video standard.
525 i 59, 625 i 50, 720 p 59, 720 i 50, 1080 i 59, 1080 i 50, Invalid Ip
Input audio
groups present
Rotate the Scroll/Adj. control to show the embedded audio groups
present in the input video.
Software
version fitted
Rotate the Scroll/Adj. control to show version number of the software
currently fitted.
PCB serial
number
Rotate the Scroll/Adj. control to show the electronically stored PCB
serial number. This should correspond with the serial number label
affixed to the PCB connector.
Setting the output configuration (format converter mode)
From the CONTROL top menu press ENTER then SCROLL to access either the Output
standard, Aspect Ratio selection or Detail control.
Menu
Comment
Output standard
Rotate Scroll/Adj. to show output standard. Press ENTER to select.
Rotate Scroll/Adj. to select output standard and press ENTER to
select.
SD, 720p, 1080i
No conversion
Rotate Scroll/Adj. to show No conversion (anamorphic).
Press ENTER to select.
The input image will be mapped directly to the native aspect ratio of
the output format. Likely considerable distortion of image.
Full image
Full 4:3 source width compressed to central 75% of 16:9 monitor
width. Full source height mapped to monitor height. Vertical black
bands added to both sides, no picture loss. (4:3 Pillarbox)
Full 16:9 source width mapped to 4:3 monitor width. Full source
height compressed to 75% of monitor height. Horizontal black bands
added to top and bottom, no picture loss. (16:9 Letterbox)
