Crystal Vision
Unicast Flow Configuration
M-VIVID User Manual R1.3
32
18 August 2022
When receiving a unicast flow, the input network video ‘Multicast address’ should be set to
0.0.0.0. The ‘Source address’ can be one of two options. If set to 0.0.0.0 it will accept any
source transmitting to its virtual interface IP address. This is acceptable if it is known only one
device at a time will be transmitting to it. Alternatively the ‘Source address’ can be limited to
only receive from one IP address, as shown in the example below, where the source address
is limited to only receiving traffic from a device with IP Address 192.168.5.20.
Unicast IP Address receive
