Crystal Vision
I/O Configuration
M-VIVID User Manual R1.3
12
18 August 2022
In a fully IP environment, the following example shows how the M-VIVID400-2 primary and
protect input and output flows could be assigned to individual virtual interfaces. As previously
mentioned, it is also possible to assign all flows to the same interface.
Flow Inputs
Eth 1:1 Primary IP Input 1
Eth 2:1 Protect IP Input 1
Eth 1:2 Primary IP Input 2
Eth 2:2 Protect IP Input 2
Flow Outputs
Eth 1:3 Primary IP Output 1
Eth 2:3 Protect IP Output 1
Eth 1:4 Primary IP Output 2
Eth 2:4 Protect IP Output 2
Alternatively, if using the VR04 or VR07, the IP flow outputs can be separated onto Eth 3 and
4.
Eth 1:1 example IP
parameters. Hover mouse
above control labels on
VisionWeb UI to show
control hints
