Crystal Vision
I/O Configuration
M-VIVID User Manual R1.3
11
18 August 2022
4 I/O Configuration
VisionWeb web browser control software is recommended for the configuration of the
MARBLE-V1 software apps. This is achieved by entering the IP address of the frame into a
web browser (10.0.0.201 on Ethernet port 1 of the frame by default). See the Vision 3 frame
manual for more information on VisionWeb and frame configuration and operation.
Example
‘
VisionWeb’ homepage
4.1 Configuring the Ethernet Interfaces
MARBLE-V1 ST 2022 and ST 2110 video over IP flows are received and transmitted using
the VR04/VR06/VR07 10GbE network interface connections. VR06 provides two network
interfaces while the VR04 and VR07 provide four. A typical usage case is to use Eth 1
interface for the ‘primary’ IP traffic and Eth 2 for the ‘protect’. The additional Eth 3 and 4
interfaces on the VR04 and VR07 allow input flows to be separated from output flows.
Within each Ethernet interface there are six virtual interfaces. These are useful for software
apps which process six individual IP flows, such as the IP gateways, as each flow can be
assigned to its own unique IP address. It is, however, possible to use the same virtual
interface for all input and output flows. If using SDI I/O with an analogue reference no virtual
interfaces will need configuring.
