Crystal Vision
Using the active front panel
CoCo104 User Manual R2.0
37
26/09/05
•
* – enters board rename menu from the Device menu
•
F1 to F4 – soft keys, function assigned within each menu
•
HOME – moves the display to the home menu
•
ENTER – enters selected card home menu from device list
•
Upward arrow – used to move up the menu structure / enter lock panel menu
from the Device menu
•
Rotary control – shaft encoder used to select options or change assigned data
values
Note:
Please refer to the Crystal Vision control panel manual for details of the Panel Setup,
Lock Panel and Diagnostic menus.
Sub-menus and data entry
The shaft encoder is used to scroll through available sub-menus and the ENTER key acts
as a guard key.
Menus with an illuminated shaft encoder LED and <ENTER> shown in the bottom line of
the display can be used to select multiple sub-menus by rotating the shaft encoder.
Press the ENTER key to make a selected sub-menu active and enter data entry mode,
press it again to leave data entry mode and continue navigating through the menu system.
