Crystal Mountain Storm, Руководство по обслуживанию

Страница: 14 / 33

4 - 1
Install and Change Water Bottle
Install Water Bottle
1. Open Dispenser door (Figure 4-1). (slide door upwards to allow access to bottle area).
2. Place fresh bottle outside of the cabinet.
3. Clean the outside of new bottle with a cloth (Figure 4-2).
4. Remove security label/seal from the bottle cap (if applicable) and install Spike Cap through the bottle
cap (do not remove Bottle Cap) and press down to secure (Figure 4-3 and Figure 4-4).
5. Insert the Bottle adaptor assembly through Spike cap until tube hits bottom of the bottle (Figure 4-5
and Figure 4-6).
Figure 4-1
Figure 4-2
Figure 4-3 Figure 4-4
Figure 4-5 Figure 4-6