Crux VRFAD-81C, Руководство пользователя

Страница: 7 / 11

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022420
7 of 11
R
INTERFACING SOLUTIONS
VRFAD-81C
Front and Rear View Integration Interface
for AUDI Vehicles with MMI/MIB/MIB2 Systems
OSD Menu Menu Item Setting Description
Input RVC
OFF Rear View camera deactivated
ON
Switches to rear-view camera if reverse gear is engaged
or PDC is activate
Option 1 Park Logic
Intelligent
For vehicles with PDC. Enabled while parking process
and up to 12 mph (not suitable for front camera
operation for vehicles without front PDC)
RGearOnly
Enabled while parking process
(not suitable for front camera operation)
RGearSpeed
Enabled while parking process and up to
e.g. 7 mph (speed adjustable)
RGearTime Enabled while parking process and up to 20 seconds
Option 1 RVC Lines ON Interactive lane lines activated
Option 2 R/F Cam Till XX Speed setting for deactivating of the camera image
Option 2 PDC Graphic
OFF OEM PDC display of the vehicle deactivated
Horizontal Vehicles with horizontal OEM PDC display
Vertical Vehicles with vertical OEM PDC display
Option 2 Cam Trigger
CAN Rear gear and blinker signal detection over CAN Bus
Analog Rear gear signal detection over 12V signals
Note: You can deactivate the camera image by a long press (2 sec.) of the rotation knob.
OSD Menu Menu Item Setting Description
Input RVC OEM
If a factory rear-view camera is present. The interface
turns off, if reverse gear is enabled and it displays
factory rear-view camera
Option 1 Park Logic
Intelligent For vehicles with front-PDC. Enabled while parking
process and up to 12 mph.
RGearSpeed Enabled while parking process and up to
e.g. 7 mph (speed adjustable)
RGearTime Enabled while parking process and up to 20 seconds
Option 2 R/F Cam Till XX Speed setting for deactivating of the camera image