Operating the Keypad
15
q
User code can arm and/or disarm arm an area in Stay mode
q
User code can change its code
q
User code can change user’s code
q
User code can Operate control Functions
q
User code can change dialer telephone numbers
q
User code can alter the real time clock
q
User can answer an incoming call and start up/down load
q
User can allow access to installer program mode from client mode.
q
Initiate Walk-test mode.
How to Change the Master Code
While in CLIENT mode, Press
and 1 to change Master code press
. Use the numeric
keyboard to enter your new Master code. The code can hold any combination of 1 to 6 digits. It
is recommended using a multi-digit code. Press
to save your new code, the new code is
displayed to you on the screen. Press
and
exit user Code Program mode.
How to Add or Change the User Code
While in CLIENT mode, press
then 1E and the User number (2 to 100) to add or change
the code, press
. Use the numeric keyboard to enter the new code. The code can hold any
combination of 1 to 6 digits. Entering the new code deletes the old code. Press
to save
your new code.
Repeat the procedure for all users.
Press
and
to exit Local Program mode.
How to Delete the User Code
In client mode, press
and the User number (2 to 100) you intend to delete, press
.
The code is displayed to you. Press
to delete User code.
Press
to save the change.
Press
and
exit program mode.
Adding/Changing Telephone Numbers
Your panel accepts up to six phone numbers with a total of 16 digits. Your panel can be
programmed to dial all or any of these depending on the event which has occurred. (The six
phone numbers are at program address P181E 1-8E).
While in CLIENT mode, key in the following sequence P181E 1E
(The address for telephone number 1), the existing number is flashed out at the keypad then
enter <NEW TELEPHONE #>
.
At any time you can enter in the address for the telephone number just to view the currently
programmed value.
For example, P181E 1E= PH # 1, P181E 2E = PH# 2, P181E 6E = PH# 6.
Содержание OLED
Страница 1: ...ELECTRONIC ENGINEERING LTD OLED Keypad User s Guide December 2009...
Страница 4: ...Contents ii Copying Text to another LCD or OLED Keypad 23 Exiting Local Edit Program Mode 23...
Страница 26: ...Operating the Keypad 24 NOTE Everywhere when pressing button is allowed you can press the button as well...
Страница 27: ...25...
