Crow OLED, Руководство пользователя

Страница: 14 / 27

Operating the Keypad
12
Emergency Alerts
This three special key’s function is best programmed by your installer to suit your individual
situation. Most commonly it is used in a panic situation.
These are a “PANIC”, “FIRE”, and “MEDICAL” alarm.
How to initiate Panic
q
Press simultaneously keys and .
How to initiate Medical Alarm
q
Press simultaneously keys and .
How to initiate Fire Alarm
q
Press simultaneously keys and .
Generate Threat or Duress
If you are compelled to disarm the system under threat, you must enter the duress digit before
the user’s code to activate the automatic dialer. The duress digit shifts up your usual code by
one digit. If your code is 345 and 8 is your duress digit, than entering 8345 modifies your code.
The modified duress code disarms the system in a normal way, but at the same time activates
the dialer silently to report a “duress event” without arousing suspicion. (For details ask the
installer).
System Messages
When viewing the memory events at the keypad by pressing the <MEMORY>, the first thing
that is always displayed is the system messages. If the system led turns ON but no other Zone
LED’s are ON at the same time, this means that there are no current system alarms. If a zone
LED and LED’s are ON then this indicates system alarms that have not yet cleared. The LED’s 1-8
are pre-defined as to what system alarm they display. These system alarm indications are shown
in the table below.
Following the display of current system alarms the panel sequences through the 255 historical
memory events starting at the most recent event. The second table shows the alarm events that
can be displayed in memory mode and what indicators are used to show them.
How to Read Trouble Messages and Events from Memory
Any failure or abnormal events that may occur are indicated by trouble messages, and the
Trouble indicator is lit. Press <MEMORY> to read out messages and other events stored in