Crosswinds Aviation DA20 C1 Eclipse, Руководство по обучению

Страница: 25 / 35

Copyright © 2019 by Midwest Air LLC
7.4
Power Off Stalls
Private ACS Requirements:
ALT +/-
100’
Bank not more than 20
◦
HDG +/- 10
◦
NOTE: Minimum safe altitude for this maneuver is 1,500’ AGL.
Power off stalls are performed in the landing configuration.
1.
Perform clearing turns
2.
Set power to 1500 RPM
3.
Below 100 KIAS Flaps T/O
4.
Stabilize
5.
Flaps LDG below 78 KIAS
6.
Stabilize the aircraft in a descent at approach speed (65 KIAS)
7. After descending approx 200’, reduce power to idle (Not less than 1,000 RPM)
8.
Simulate landing flare by raising the nose to the horizon.
9.
maintain pitch by applying constant back pressure
10.
Maintain coordination at all times
11.
Recognize and announce symptoms of approaching stall
12.
Sight, sound, feel
13.
Stall warning horn activates
14.
Aerodynamic buffeting
Recovery procedure
1.
Reduce the Angle of Attack
2.
Level the wings using coordinated rudder and aileron
3.
Gradually apply full power
4.
Stop Descent
5.
Retract flaps to T/O
6.
Establish a shallow climb (100-200 FPM)
7.
At positive rate of climb and approaching 65 KIAS
8.
Retract flaps to CRUISE
9.
Climb at 75 KIAS to initial altitude
10.
Complete both CLIMB and CRUISE checklists after leveling off
NOTE: At any time if engine appears to drop below 1,000 RPM, add throttle to ensure
engine will not stop.