Crossport Systems Pivio, Руководство пользователя

Страница: 18 / 60

18
Pivio User’s Guide
Connecting the Pivio Plus Firewall
Use the following procedure to connect the Pivio Plus Firewall.
Step 1: Plug the AC adapter cord included with the Pivio Plus Firewall
into the “AC In” outlet located on the back of the firewall.
Step 2: Plug the AC adapter into a surge-protected outlet.
Step 3: Turn off your computer.
Step 4: Find the cable connecting your DSL/Cable modem to your com-
puter or network hub. Unplug it from the modem , and plug it into
the port labeled
Uplink
located on the Pivio Plus Firewall.
Step 5: Plug one end of the red cable into the port labeled Internet on the
Pivio Plus Firewall and the other end into your modem.
Insert the Pivio Plus Firewall between your computer or hub and DSL/
Cable modem
Step 6: Verify that the green LED light next to each port with a cable in it
on the back of the Pivio Plus Firewall is lit.
If the LED is not lit, press the Mode switch next to the port. This
should cause the LED to light up.