Crossport Systems Pivio, Руководство пользователя

Страница: 14 / 60

14
Pivio User’s Guide
Connecting the Pivio Firewall
Use the following procedure to connect the Pivio Firewall.
Step 1: Plug the AC adapter cord included with the Pivio Firewall into the
“AC In” outlet located on the back of the firewall.
Step 2: Plug the AC adapter into a surge-protected outlet.
Step 3: Turn off your computer.
Step 4: Find the cable connecting your DSL/Cable modem to your com-
puter or network hub. Unplug it from the modem, and plug it into
the port labeled
LAN
located on the Pivio Firewall.
Step 5: Plug one end of the red cable into the port labeled Internet on the
Pivio Firewall and the other end into your DSL/Cable modem.
Insert the Pivio Firewall between your computer or hub and DSL/Cable
modem
Step 6: Verify that the green LED light next to each port on the back of the
Pivio Firewall is lit.
If the LED is not lit, press the Mode switch next to the port. This
should cause the LED to light up.