Crossfire HD-350, Руководство оператора

Страница: 10 / 21

Page 8
1. Welding Current Meter 2. Welding Voltage Meter 3. Host Ring 4. Thermal Indicator Light
5. Power Indicator Light 6. Power Voltage Fine Switch 7. Voltage Course Switch 8. Trailing wheel
9. Front wheel 10. Work Piece Connection 11. Work Piece Connection 12. Power Input Cable
13. Hook For Cable 14. Gas bottle protection bracket 15. Nameplate 16. Heater Socket
17. Supply Fuse 18. Wire Feeder Connection 19. Controlling Cable Connection 20. Gas Bottle Rack
1. connection for torch 2. connection for torch 3. front wheel 4. rear wheel
5. handle 6. welding current knob 7. name plate 8. gas check button
9. wire feed button 10. spool shaft 11.2/4 step switch 12. handle
13. Burn back time knob 14. Slow wire feeding switch 15. wire feeder motor 16. Welding cable connector
17
．
Cable connector 18.Gas connector
4.4.1 2/4 step switch
2 step: Press torch trigger, gas on, power on, wire feeding start.
Release torch trigger, wire feeding stop, gas off, power off.
4 step: Press torch trigger, gas on, power on, wire feeding start.
Release torch trigger, continuous working.
4.4.2 Gas check button
Press, only solenoid works, other circuit close.
4.4.3 Wire feed button
Press, wire feeder motor works, other circuit close.
4.4.4 Welding current knob
Stepless welding current adjustment
4.4.5 Burn back time adjustment
Adjusting burn back time
4.4.6 Slow wire feeding speed knob
Adjusting wire feeding speed before arc generation.
t