*
PLEASE NOTE: The two character {aa}(00-31) prefix, in the following table,
should be used ONLY when RS-485,is selected.
TABLE 1.3 2282-122-2
21
Command
Syntax * Description
Set RF Switch Position
{aaCAx}
where:
aa = unit address, range = 00 to 31,only used if interface is RS485,
otherwise omit.
A = command code
x = desired switch position, 0, 1 or 2. Once the switch position is
selected remotely,the unit is in.
"Remote Mode" and the front panel remote indicator will light.
The unit will remain in Remote Mode until one of the following occurs:
1. A Switch Reset command ( {CB} ) is issued.
2. The front panel Switch Reset button is pressed.
If the switch is already in manual mode (i.e, the front panel toggle switch
is in the CH1 or CH2 position) then the unit will ignore this command.
example: {CR2}
Will (remotely) set the switch to CH2. The unit will ignore this command
if the unit is in manual mode.
The unit will reply with the '>' character if the command is sucessfully
processed because the Unit is in Manual Mode.
The unit will reply with the '>' character if the command
is sucessfully processed.
Set Priority
{aaCPx}
where:
aa = unit address, range = 00 to 31,only used if interface is RS485,
otherwise omit.
P = command code
This command sets the auto switching priority to either 1 or 2,
where x=1 or 2 respectively.
example: {CP2}
Will set the switch to prioritize channel 2 if both are alarmed.
The unit will reply with the '>' character if the command is
sucessfully processed.
Switch Reset
{aaCB}
where:
aa = unit address, range = 00 to 31, only used if interface is RS485,
otherwise omit
B = command code
This command has the same effect as pressing the front panel
Switch Reset button.
example: {CB}
Will return a unit to Auto mode if it is in Remote mode.
Also, this command will reset the switch position if it is currently
"latched" to CH2 in the Latch to CH2 mode (and if CH1 is not alarmed).
The unit will reply with the '>' character if the command is
sucessfully processed.
2282-122-21 Manual, Rev. A
Page 9
07/01/20
