Menu 9 Set Serial Interface
COMM INTERFACE R
RS-232
Use the UP/DOWN switch to scroll through the available serial remote M&C interfaces (RS-232, RS-422, or
RS-485). Push the PROGRAM/EXECUTE switch to go to the next menu. Use the LEFT/RIGHT switch to
move the cursor to R, then push the PROGRAM/EXECUTE switch to jump to the SAVE SETTINGS menu.
Menu 10 Set RS485 Remote Address
ADDRESS=00 R
Use the up and down switches to set the RS-485 address of the unit. This only applies if the serial interface is
set to RS-485. Do not include the address in M&C commands if the interface is not RS-485. Push the
PROGRAM/EXECUTE switch to go to the next menu. Use the LEFT/RIGHT switch to move the cursor to R,
then push the PROGRAM/EXECUTE switch to jump to the SAVE SETTINGS menu.
Menu 11 Display Internal PCB Temperature
TEMPERATURE= R
+31 DEGREES C
This menu displays the internal temperature of the unit in degrees celsius. Push the PROGRAM/EXECUTE
switch to go to the next menu. Use the LEFT/RIGHT switch to move the cursor to R, then push the
PROGRAM/EXECUTE switch to jump to the SAVE SETTINGS menu.
2282-122-21 Manual, Rev. A
Page 22
07/01/20
