TABLE 1.1 Continued: 1586-04-0431 Commands
TABLE 1.1 Continued: 1586-04-0431 Commands
TABLE 1.1 Continued: 1586-04-0431 Commands
Command
Syntax *
Description
Set Channel 3 Gain
{aaCCyyyy}
where:
aa = unit address, range = 00 to 31, only used if interface is RS485, otherwise omit
C = command code (case sensitive, capital C)
yyyy = Channel gain in dB.
Range: channel 3 offset -10.0 to channel 3 offset -70.0 in 0.5 dB steps; the decimal
point is optional.
example: {CC-455}
Will set channel 1 total gain (including offset) to -45.5 dB.
The unit will reply with the '>' character if the command is sucessfully processed.
Set Channel 3 Offset
{aaCcyy}
where:
aa = unit address, range = 00 to 31, only used if interface is RS485, otherwise omit
c = command code (case sensitive, lower case c)
yy = Channel offset in dB. This value reflects any external attenuation added to
the system.
Range: 00 to 60 dB.
example: {Cc40}
Will set channel 3 external attenuation offset to 40 dB.
The unit will reply with the '>' character if the command is sucessfully processed.
Set Channel 4 Gain
{aaCDyyyy}
where:
aa = unit address, range = 00 to 31, only used if interface is RS485, otherwise omit
D = command code (case sensitive, capital D)
yyyy = Channel gain in dB.
Range: channel 4 offset -10.0 to channel 4 offset -70.0 in 0.5 dB steps; the decimal
point is optional.
example: {CD455}
Will set channel 4 total gain (including offset) to -45.5 dB.
The unit will reply with the '>' character if the command is sucessfully processed.
Set Channel 4 Offset
{aaCdyy}
where:
aa = unit address, range = 00 to 31, only used if interface is RS485, otherwise omit
d = command code (case sensitive, lower case d)
yy = Channel offset in dB. This value reflects any external attenuation added to
the system.
Range: 00 to 60 dB.
1586-04-0431 Manual
Page 7
4/12/21
