Cross Technologies 1586-04-0431, Инструкция по эксплуатации

Страница: 16 / 18

2.5.5 Alarm Indications
An alarm condition for will occur if the l+12 VDC or -12VDC power supplies (to the internal attenuators) are
out of range.
ON POWER UP
NORMAL DISPLAY
PUSHING MENU/EXECUTE SEQUENCE
1586-04-0431W8W28
5.20
G1=-33.0 G2=-41.0
G3=-17.0 G4=-52.0
CH1 GAIN=-33.0
CH1 20 R
SCROLL <>
SCROLL PUSH BUTTON
REMOTE ON
SCROLL <>
SCROLL PUSH BUTTON
PUSH BUTTON
Power Up
Normal Display
Menu 1 CH 1 GAIN, OFFSET
Menu 2 CH 2 GAIN, OFFSET
Menu 3 CH 3 GAIN, OFFSET
Menu 4 CH 4 GAIN, OFFSET
Menu 5 Set REMOTE
Menu 6 Set Interface
Menu 7 Set RS485 address
Menu 8 Reset Ethernet Settings
Menu 9 Save Settings When “R” is
selected from any menu above, or at
the end
CH2 GAIN=-41.0
CH2 10 R
SCROLL <>
SCROLL PUSH BUTTON
SAVE SETTINGS? YN
SCROLL <> PUSH BUTTON
R
R RS485 ADDR 01
INTERFACE
RS232 R
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
R RESET ETHERNET
SETTINGS NO
SCROLL <>
SCROLL PUSH BUTTON
CH3 GAIN=-17.0
CH3 00 R
CH4 GAIN=-52.0
CH4 30 R
FIGURE 2.5 Menu Display and Sequence
1586-04-0431 Manual Page 16 4/12/21