background image

GP-OMMHL-A

2

INTRODUCTION

GENERAL MANAGER’S WELCOME  

Congratulations on the purchase of your new Croplands sprayer.

Croplands has been in the business of building and selling spraying 
equipment since 1972. For over 49 years we have been supplying spray 
equipment to farmers, contractors, growers and all our customers involved  
in growing crops and in the control of pests and diseases.

Croplands is a wholly owned subsidiary of Nufarm Ltd, the largest supplier 
of crop protection chemicals in Australasia, and one of the fastest growing 
global suppliers world-wide.

At Croplands, we pride ourselves on our commitment to supplying machinery 
that is at the forefront of the industry’s needs. We believe we can back up  
our products and through constant research and development, bring to you 
the best equipment you can find.

We welcome any feedback from you about our equipment.

On the back page, you will find our contact details, and locations where  
our staff can be reached during business hours.

After hours, you can email us and expect a reply the following morning.

Please read this manual in its entirety before you operate your sprayer.  
This will ensure you have a trouble-free start up.

We trust you will get years of good use from your Croplands Sprayer.

Yours Sincerely

Sean Mulvaney
General Manager

Croplands has taken steps to ensure this operator’s manual is as current and as accurate as possible. 

Due to the ever-changing markets of cropping and farming, Croplands is constantly striving to be at the 

forefront of innovation and technology. While the information in this manual is considered accurate at the 

time of writing, Croplands reserves the right to change this information without notice. Croplands will not 

accept liability for any inaccuracy in this publication, or changes forthwith.

Sean Mulvaney  

General Manager 

Содержание MHL12


















































Отзывы: