23
GB/IE
• The helmet should protect your head in the event of an impact . This pro-
tection is no longer provided even after a single impact (even if it is light) .
Therefore the helmet must be replaced immediately after an accident even if
there is no visible damage .
• Never use solvents or scouring agents that contain petroleum to clean the
helmet, either on the outside or the inside . Always use a detergent that is pH
neutral and diluted with clear water; rub the article carefully with a soft cloth .
Then wipe it dry with a lint-free cloth . The padding can be cleaned with a
little soap and a soft brush .
• Only use original replacement parts for your helmet .
• The LED light is not a safety aid and on no account replaces the specific
devices that are compulsory in accordance with traffic regulations .
• The lifespan of the article depends on its use . However the article must be
replaced five years after the date of manufacture (version: 12/2018) at the
latest .
Warnings on batteries!
• Remove the batteries if they are empty or if the product is not going to be
used for an extended period .
• Do not use different battery types or brands, new and used batteries in
combination, or batteries with different capacities, as they leak and can thus
cause damage .
• Observe the polarity (+/–) when inserting batteries .
• Change all batteries at the same time and dispose of the old batteries prop-
erly .
• Warning! Batteries may not be charged or reactivated in any way . They may
not be dismantled, thrown into fire, or short-circuited .
• Always keep batteries out of the reach of children .
• Do not use rechargeable batteries!