Critical Environment Technologies GEM-II, Руководство по эксплуатации

Страница: 7 / 60

© 2014 All rights reserved. Data subject to change without notice. 7
Rev. E | 2014.10 GEM-II - Operation Manual
Prior to shipping equipment to CETCI, contact our office for an RMA #. All returned goods must
be accompanied with an RMA number.
If CETCI is to do the repair work, you may send the instrument, prepaid, to:
Attention: Service Department
Critical Environment Technologies Canada Inc.
Unit 145, 7391 Vantage Way
Delta, BC, V4G 1M3
Always include your Returned Merchandise Authorization (RMA) number, address, telephone
number, contact name, shipping / billing information, and a description of the defect as
you perceive it. You will be contacted with a cost estimate for expected repairs, prior to the
performance of any service work.
For liability reasons, CETCI has a policy of performing all needed repairs to restore the instrument
to full operating condition.
Pack the equipment well (in its original packing if possible), as we cannot be held responsible for
any damage incurred during shipping to our facility.
1.4 Copyrights
This manual is subject to copyright protection; all rights are reserved. Under international and
domestic copyright laws, this manual may not be copied or translated, in whole or in part, in any
manner or format, without the written permission of CETCI.
1.5 Disclaimer
Under no circumstances will CETCI be liable for any claims, losses or damages resulting from or
arising out of the repair or modification of this equipment by a party other than CETCI service
technicians, or by operation or use of the equipment other than in accordance with the printed
instructions contained within this manual or if the equipment has been improperly maintained
or subjected to neglect or accident. Any of the foregoing will void the warranty.
Under most local electrical codes, low voltage wires cannot be run within the same conduit as
line voltage wires. It is CETCI policy that all wiring of our products meet this requirement.
It is CETCI policy that all wiring be within properly grounded (earth or safety) conduit.