7
WIRING: 12-PIN Connector Cont.
ORANGE: (-) 500mA Starter Disable/Anti-Grind Output
This wire should be connected to the Yellow wire of the pre-wired relay socket for the starter disable. Connect the
White wire of the relay socket to the Ignition switched wire on the vehicle. Cut the vehicle starter wire and connect
each half to a Green wire on the relay socket. This output also turns on with remote start to function as an “Anti
Grind” wire to prevent the starter from grinding if you get in your car and turn the key too far after it was remote
started.
CUT
STARTER WIRE
STARTER
GREEN
GREEN
CONNECT TO
PRE-WIRED
OF ALARM
IGN. SWITCHED
WHITE
YELLOW
ORANGE WIRE
STARTER DISABLE
RELAY & SOCKET
IGNITION SWITCHED
"ON" & HOT THROUGH
CRANKING
BROWN
START OUTPUT
6-PIN HARNESS
FROM ALARM
MAKE CERTAIN TO
CONNECT BROWN
WIRE TO STARTER
MOTOR SIDE!!!
STARTER DISABLE:
