4
WIRING: 12-PIN Connector
BLACK: Chassis Ground
Connect to body metal of the vehicle using a sheet metal screw and a star washer to ensure a good ground. Keep
the Ground wire short. Scrape away paint or debris from ground location.
WHITE: PARKING LIGHT OUTPUT
RED/BLACK: Input Source, 12 Volts or Ground
The Parking Light circuit can be connected up as a high current positive or negative trigger. Connect to vehicle
parking light circuit at the back of light switch or if this is not possible, connect directly to one of the parking lights at
the front of the vehicle. If your vehicle has a multiplex lighting system, that will require a resistor connected in series
with the white wire to the light switch. Use the Negative parking light circuit for Multiplex resistor lights.
Positive Parking Lights
White
(+)
Parking Lights
12 Volt
Battery
FUSE
(+)
10 AMP
Red/black
(Lights)
Negative Parking Lights
White
(-)
Parking Lights
Ground
FUSE
10 AMP
Red/black
(Lights)
