8
VALET MODE
VALET PARK
OPERATING INSTRUCTIONS - ALARM
Emergency Override (Disarm)
If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to
disarm the system manually. Open the door with the key [alarm will sound], turn the ignition on, and press the
override/program button for about 5 seconds. The Alarm will disarm and allow you to use the vehicle until you
can repair/replace the remote. Valet mode also prevents Passive Arming.
Valet Mode (Enter manually or using the remote)
To disable Alarm and Remote Engine Starting for vehicle servicing or otherwise, turn the ignition on and press
the override/program button [about 5-7 seconds] until you hear (3) siren chirps and the LED turns on solid.
Repeat the process to exit VALET mode. To enter / exit valet via the remote, press and hold both buttons #1
(Lock) and Button #2 (unlock) together for about 3 seconds until 3 chirps are heard. Repeat this step to exit
via the remote transmitter. Lock/Unlock and AUX features will still operate in when in VALET mode however,
remote start and alarm functions are inhibited.
Valet Park Mode (Using the remote transmitter only)
Note: Valet Park mode is only accessible when using the remote
transmitter. Valet park mode allows you to turn over the vehicle
to a valet allowing access to drive/lock/unlock your vehicle, but
alarm will trigger if the trunk is opened. To activate Valet Park,
press and hold both buttons #1 (Lock) and Button #2 (unlock)
together for about 3 seconds. 3 chirps will be heard first when
unit goes into regular Valet. Release, press and hold both
buttons again,you will hear 2 more chirps. LED will always flash
slowly when in Valet Park even when the Ignition is turned on
(or driving vehicle). Repeat step above to exit Valet Park mode.
Optional M.A.P. (Mobile Accessories Protection)
This system can be programmed to provide Crimestopper’s unique M.A.P. (Mobile Accessories Protection) feature that
allows you to prevent unauthorized access of your vehicles Audio, Cellular, Navigation, or Entertainment systems. This
feature is OPTIONAL and requires extra parts and labor for installation. Consult your installation dealer about MAP
before or during installation. The CS2014DPTW2-FM/FM must be programmed for MAP operation. When the system
is put into Valet Park mode, M.A.P. will prevent stereo, entertainment, navigation, or cellular system from being used.
