16
2 VEHICLE OPERATION
2 VEHICLE CONTROL
Your CS-2014DP-TW2FM/FM remotes have the ability to control a second vehicle with a Crimestopper CS-
2014DP-TW2FM/FM system installed.
To set up the 2-Vehicle operation you
must first program your remotes to
Vehicle #2. Follow the “Transmitter
Programming” steps (Pg. 14) at the
second vehicle and learn YOUR remote,
along with vehicle #2’s existing remotes.
2-VEHCLE OPERATION NOTES:
(1) You do not have to switch between
Vehicle I and II to get pages from each
vehicle. Your remote pager will receive
pages from both cars regardless of which
vehicle the pager is set to. The “1” or “2”
icon will always display with each page
indicate which vehicle the page originated
from.
(2) When programming CS-2014DP-
TW2FM/FM systems, all remote/pagers
and sidekick remotes for that vehicle
must be learned at the time of
programming. When you program your
remote at the second vehicle, that
vehicle’s original remote must also be
programmed. Your remote should be set
in Vehicle “2” and the vehicle’s original
remote should be set in Vehicle “1”.
Press & hold button #5 for
2 seconds or until the LED
flashes , then you have 3
seconds to control vehicle #2.
Press & hold side button
for 2 seconds. The remote
will beep and "2" icon will
appear on LCD screen.
"Sidekick"
VEHICLE #2 CONTROL:
Remote
FIXED
ANTENNA
LED
Flashes
START
CRIMESTOPPER