3
TRANSCEIVER / PAGER-REMOTE
PAGER / REMOTE TRANSCEIVER:
The hand-held remote transceiver is used to send and
receive information from the vehicle. The Control Module
transmits High Frequency FM/FM signals from the vehicle
to your over long distances. Your range will vary
depending
on
location,
terrain,
and
local
RF
noise/interference. This system is not guaranteed to page
you if you are behind concrete walls, underground, in a
large structure, or in an area with high levels of electronic
interference. Handle the pager/remote with care if the
LCD display and/or the electronics may be damaged if
subjected to abuse. The AAA Cell 1.5V alkaline battery
can easily be replaced by sliding open the battery access
door on the back of the remote. Battery life will vary
depending on usage. The LCD screen will display a low
battery icon when the battery is low. For more see
“Range Questions” on page 17.
Button
Button Functions
Button Options
Buttons
Button Functions
Button Options
Lock Doors & Arm System
Press and Hold for 3
seconds
Activate “Panic” feature
Aux#3
Press Button #1 and #4 at
the same time
Unlock Doors & Disarm
System
Press twice for second door
unlock
Aux #4
Press Button #3 and #4 at
the same time
Trunk Release (Aux # 1)
Press and Release for Aux
#1
Car Jack
(See page 14)
Press Button #1 and #3 at
the same time
Aux #2
Press and Hold button #2 &
#3 for 3 sec.
Silent Arm/Disarm
Press Button #2 and #4 at
the same time
Start or Stop engine
Press and Hold for 3
seconds
Press and release to light up the LCD screen.
Press and release twice to recall the last message from the LCD screen.
2-car operation (Side Button)
Press and Hold two seconds
to change from Car 1 to Car
2
Press 5 times to change the Time and Disable or Enable Beep on the remote.
See page 19 for details.
#2 DISARM
UNLOCK
LCD
SCREEN
#4 ENGINE
START/STOP
#1 ARM
LOCK
#3 TRUNK
#5 RECALL
CAR I or II
FIXED
ANTENNA
AM
