Page
Page
Continued Next Page
-15
feature, the doorlocks, and trunk release; the doors will also lock when the ignition
switch is turned "on" and unlock when it is turned "off"'. Note: While the security
system is in the Valet Mode, every time the ignition switch is turned "off", the siren
will chirp once as a reminder.
To Turn Off The Easy Valet: Simply press the Easy Valet Switch, and instantly
the security system will exit out of Valet Mode. To confirm that the Valet Mode is
turned off, the LED Status Indicator will turn off.
Disarming The Security System If The Transmitter Is Lost: In the event the
transmitter is lost, damaged, or its batteries become exhausted, the Easy Valet
Switch
and your ignition key can be used to disarm the system:
STEP 1. With the system in the armed condition, enter via the driver's door (be aware
that the security system will trigger the instant the door is opened).
STEP 2. Use the ignition key to turn "on" the ignition switch.
STEP 3. Within 5 seconds, press the Easy Valet Switch. The security system will
instantly disarm.
Red LED Status Indicator
The LED Status Indicator feature is a visual indicator of what state the security
system is in at any given time. It is normally positioned in a location that is easily
-18
Continued Next Page
Electronic Siren And Flashing Lights
The electronic siren and the vehicle's exterior lights primary function is to attract
attention to your vehicle if the security system is triggered. In addition, they are also
used to communicate with you, as a way of confirming actions that have taken place,
or, that may be in process of automatically taking place. A chirp is the short, sharp
sound the siren makes as part of this communication. The exterior lights referred to
are the vehicle's parking lights. We do not recommend flashing the headlights. The
halogen headlights found in modern vehicles are not designed to be rapidly turned on
and off. If connected to the security system, a reduction of their useful life may be
noticed.
Siren Chirp With Light Flash Confirmation For Arming, Disarming & Valet
Activation: The following siren chirps and flashing exterior light actions inform you
of these conditions of the security system:
1) One siren chirp and one light flash: The system has armed.
14) Flash-2x & Pause = The security system has detected a trigger from the hood,
trunk circuit or the Port B optional auxiliary sensor input.
15) Flash-3x & Pause = The security system has detected a trigger from the door
circuit.
16) Flash-4x & Pause = The security system has detected a trigger from the Port A
auxiliary sensor input.
