Page
Page
instant triggers bypassed (Port A) or just the prewarn trigger bypassed (Port B). When
using two sensors, the most sensitive of the two sensors will generally be plugged into
Port A. An example of this flexibility would be a sensitive shock sensor plugged into
Port A and a radar sensor plugged into Port B. When the remote sensor bypass feature
is used, the shock sensor will be completely bypassed and the exterior zone of the radar
sensor will also be bypassed. This leaves only the interior zone of the radar sensor
intact, reducing a possible false alarm caused by parking in an area of heavy traffic
or other vibrations, while leaving the radar sensor's interior zone as part of the security
systems protection. The dual auxiliary ports' operation allow extreme flexibility in
designing a custom security system.
If the system is triggered by the sensor plugged into Port A the Zone Violation
feature will flash the LED Status Light four times between pauses. If the system is
triggered by a sensor plugged into Port B the Zone Violation feature will flash the LED
Status Light twice between pauses.
Prewarning Shock Detection Circuit: This circuit requires connection to an
auxiliary detection sensor device. When the sensor is triggered by a light impact or
shock to the vehicle, the security system will respond by chirping the siren 3 times and
locking all of the doors. After this circuit has been triggered 5 times it will
automatically shutdown until the alarm system is rearmed again. This will prevent the
security system from being a nuisance to the general public.
-22
turning on for 30 seconds, except under the following conditions: 1) the lights will turn
off 10 seconds after a door has been opened, or 2) the lights will turn off instantly if
the ignition switch is turned "on". Note: If the system was triggered and reset while
you are away, the disarm confirmation will change to 4 siren chirps, 4 light flashes,
and then the lights will stay on for 30 seconds, to illuminate the way to your vehicle.
The security system will have this response upon disarming until the ignition switch
is turned "on", which clears the unit's memory. Note: Anytime the security system
triggers, the LED Status Light will indicate which zone triggered the system by
flashing one to four times, pausing between flashes. This code will continue to flash,
even after disarming. The system can hold two different violation codes in it's memory,
which is cleared by turning the ignition switch "on".
Your CG 745i vehicle security system offers a very high level of personal safety
and convenience with the advanced features utilized upon disarming. The ability to
unlock the driver's door only prevents a potential attacker from gaining entry into your
vehicle from the other doors, you'll know instantly if your system was triggered while
you were away, and the exterior and interior light illumination allows you a lighted
approach to your vehicle with the ability to examine the interior before entry. If you
wish, your dealer can program the system to turn on the exterior and interior lights for
sixty instead of thirty seconds upon disarming.
Automatic Rearming Feature: Should you unknowingly activate your transmitter,
which results in your system disarming, your Crime Guard system will automatically
-11
Continued Next Page
