Page
Page
4) Current Sensing.
Feature Turned On: When the security system is armed, current sensing can detect
a positive current draw from the vehicle's battery. (Example: the dome light comes
on when a door is opened or the brake lights come on when the brake pedal is
pressed). With this feature on, the security system will trigger if a current draw is
detected.
Nine Features Programmed By Easy Valet
TM
Switch And The Transmitter:
1) The Doors Will Lock At Ignition "On", Unlock At Ignition "Off".
Feature Turned On: The security system will automatically lock the vehicle's doors
one second after the ignition switch is turned "on", and unlock the doors the instant the
ignition switch is turned off. This feature adds considerable personal security to you
and your family.
2) Adding Open Door Bypass To Feature 1:
Feature Turned On: When the security system locks and unlocks the doors from
Feature 1, if a door is open the doors will not automatically lock when the ignition
switch turns "on", or automatically unlock when the ignition switch is turned "off".
This prevents accidentally locking yourself out of the vehicle by turning the domelight
on if leaving it momentarily. This feature also prevents children from exiting the
vehicle by opening your door before turning the ignition switch "off" (most modern
cars allow you to open the door by using the inside handle).
-25
Continued Next Page
button when arming the system. You will hear a second siren chirp, confirming the
security system has armed without the sensor circuit protecting the vehicle. The next
time you arm the security system, the system will reset to its normal condition, and
the optional sensor will again be part of your protection.
You can also pre-select your security system to automatically arm and lock the
doors. This information is described in the following section.
-8
Continued Next Page
Passive System Arming By "Last Door Arming"
Your security system can be programmed to arm automatically when the
vehicle's last door is closed. The moment the last door closes, the siren will chirp once,
the parking lights and dome lights will flash once and the LED Status Indicator will
begin to flash rapidly. Thirty seconds later the siren will chirp again, the doors will lock
(If the Passive Lock feature has been chosen) and the LED Status Indicator will slow
to a steady flash, confirming that the security system is fully armed. However, if a
point of entry is reopened before the single chirp at 30 seconds, the passive arming
process stops, and will reset to start over again when that point of entry is reclosed.
"Automatic Last Door Arming" offers a high level of security, since it does not
require you to remember to activate the security system when you leave your vehicle.
Additionally, Automatic Last Door Arming may entitle you to an insurance discount.
Note: Arming By-Pass (page 7) does not operate with the Automatic Last Door
Arming feature. This bypass feature is designed to work only when arming from the
