Crevalle Boats 33 CSF, Руководство пользователя

Страница: 91 / 188

91
11.1 Deck Rails & Deck Hardware
The rail system and hardware fittings have been
selected and installed to perform specific func -
tions. Hand rails are installed to provide a hand-
hold in certain areas of the boat. You should make
sure you keep at least one hand on the handholds
as you move about the boat.
The cleats on your boat are retractable and flush
with the deck when not in use. To use the cleats,
pull up on the center of the cleat until it locks in
the mooring position.
Fenders or mooring lines should be secured to the
cleats and not to rails or stanchions. Be sure a
clear lead exists when running dock lines or anchor
lines. A line inadvertently run around a stanchion
or over the rail could cause damage.
Important:
All fittings must be periodically inspected
for loose fit, wear or damage. Any problems
should be corrected immediately.
WARNING
CREVALLE BOATS ARE NOT EQUIPPED WITH HARDWARE
DESIGNED FOR TOWING PURPOSES. THE MOORING
CLEATS ARE NOT TO BE USED FOR TOWING ANOTHER
VESSEL OR HAVING THIS BOAT TOWED.
Chapter 11:
Cleat Retracted
Cleat Up
EXTERIOR EQUIPMENT