Crevalle Boats 33 CSF, Руководство пользователя

Страница: 39 / 188

39
Propulsion System
Temperature Gauge
The temperature gauge indicates the temperature
of the engine cooling system. A sudden increase
in the temperature could signal a blocked cooling
passage or a water pump malfunction.
CAUTION
CONTINUED OPERATION OF AN OVERHEATED ENGINE
CAN RESULT IN ENGINE SEIZURE. IF AN UNUSUALLY HIGH
TEMPERATURE READING OCCURS, SHUT THE ENGINE OFF
IMMEDIATELY. THEN INVESTIGATE AND CORRECT THE
PROBLEM
Oil Pressure Gauge
The oil pressure gauge monitors the engine lubri-
cation system pressure. The oil pressure indicated
when the engine is new is usually the reference
for normal oil pressure for that engine. A drop
in oil pressure is a possible indication of oil pump
problems, a leak or fuel diluted oil.
Fuel Gauge
The fuel gauge indicates the amount of fuel in
the fuel tank. This gauge is merely a relative
indication of the available fuel supply and not a
calibrated instrument.
Voltmeter
The voltmeter displays the voltage for the battery
and the charging system. The normal voltage is
11 to 12.5 volts with the engines off, and 13 to
14.5 volts with the engines running.
Hour Meter
The hour meter keeps a record of the operating
time for each engine.
Tilt/Trim Gauge
The tilt/trim gauge monitors the position of the
engines. The upper range of the gauge indicates
the tilt, which is used for trailering and shallow
water operation. The lower range indicates the
trim position. This is the range used to adjust
the hull angle while operating your boat on plane.
Refer to the Helm Control Systems chapter and
the engine owner’s manual for more information
on the operation of the power tilt and trim.
Depth Gauge
The Depth gauge indicates the depth of the water
below the bottom of the boat. The gauge is
equipped with a shallow water alarm. The alarm
will sound at a depth preset by the operator.
Fuel Management
Fuel management systems could be installed on
your boat as part of the engine monitoring system.
On most engines, the fuel management gauge is
built into the digital display and can monitor miles
per gallon, total gallons used and total gallons
remaining.
If you have a fuel management system installed on
your boat, refer to the engine or fuel management
manual for information on that system.
Engine Alarm
Outboard engines are equipped with an audible
alarm system mounted in the helm area that moni-
tors selected critical engine systems. The alarm
will sound if one of these systems begins to fail.
Refer to the engine owner’s manual for information
on the alarms installed with your engine.
If an engine alarm sounds, immediately shut off
the engine, if safe to do so, until the problem is
found and corrected.
Mercury VesselView 403
Tachometer & Engine Monitoring Display