background image

 

 

M5 16/32/48/60-M-A/E-O 

Created on 4/14/2011 8:18:00 AM 

BEGIN SERIAL NO. 09010131 

 

 

 

 

Always turn the kettle switch off when not popping corn.  Failure to do so will cause 

oil to stain the kettle, possibly resulting in an unsanitary condition.  It may also cause 
a "flash" fire if oil is added to a kettle left unattended with the heat on, resulting in 
serious burns or death.

 

 

 

If this machine is equipped with the Ansul option, an ansul representative must be 

called out to activate the ansul system prior to use.  Call 1.800.TO ANSUL for the 
closest representative.

 

 
To operate your Cretors popcorn popping machine: 

 

1.

 

Fill the corn drawer with corn on floor models. 

 
2.

 

Fill the salt box and hang it on the inside edge of the corn drawer. 

 
3.

 

Connect and adjust the pump as explained in the installation instructions.  Preheat the 
popping oil until liquid, if necessary. 

 

4.

 

Fill the corn measure with corn and the salt measure with the salt, and empty these into 
the kettle.  When making sugar corn, add the correct amount of sugar, rather than salt, 
with the measure for corn.  

 

 

WARNING! 

Always add corn to the kettle before pressing the oil delivery button or 

adding oil.  Failure to do so may result in the oil being heated too rapidly resulting in a 
fire.

 

 

 

Avoid contact with the kettle.  Contact with a hot popping kettle may result in serious 
burns or scalds. 

 

5.

 

Close the kettle lid by pulling the kettle cover knob down. 

 

6.

 

If equipped, move Salt/Sugar switch to desired mode. 

 

7.

 

Turn on the agitator, the exhaust fan, and then turn on the kettle heat and press the oil 
delivery button.  For a ventless hood machine, the exhaust must be turned on and be 
functional for the popper heat to function.  When the exhaust switch is turned on, an 
audible alarm will sound for a few seconds, clicking will be heard, and then the 
machine will be operational.  If the Giles hood will not run, the popping circuit will be 
disabled until the problem is resolved.  

 
8.

 

If machine is with the One Pop option, press the One Pop button to begin the popping 
cycle, and oil delivery. 

 

 

WARNING!

 After the first popping the kettle is hot.  Avoid contact with the kettle 

when adding corn or salt.  Failure to do so may result in serious burns or scalds.

 

 

Содержание MACH 5 M516 Series













Отзывы: