M5 16/32/48/60-M-A/E-O
Created on 4/14/2011 8:18:00 AM
3
BEGIN SERIAL NO. 09010131
I. SAFETY ALERT SYMBOL
The symbol shown below is used to call your attention to instructions concerning your personal
safety and the safety of others. Watch this symbol. It points out important safety precautions. It
means
ATTENTION! Become Alert!
Your personal safety is involved!
Read the message that
follows and be alert to the risk of personal injury or death.
II. SAFETY FIRST
The information in this manual is essential for the safe installation and operation of
your Cretors popcorn machine. The manual must be read and understood before
installing, or operating this equipment, or equivalent training must be provided.
"The employer shall instruct each employee in the recognition and avoidance of
unsafe conditions, as well as, the regulations applicable to his work environment to
control or eliminate any hazards or other exposure to illness or injury".
Ref.: 29 CFR 1926.20 (b)(4)(a)(2)
It is understood that safety rules within individual companies vary. If a conflict
exists between the safety procedures contained in this manual and the rules of a
using company, the more stringent rule should take precedence.
The purpose of equipotential bonding studs, terminals and systems is to join
together the metalwork in a product, whether it needs to be grounded or not, so
every point is at the same potential/voltage. This bonding is not intended to
provide grounding (a separate low resistance ground-fault current path back to the
source).
III. INTRODUCTION
This manual is filled with time-saving and money-saving information regarding your Cretors
popcorn machine. There is nothing more important than the safety aids and warnings that are
throughout this document. The Safety Alert Symbol is used to identify topics of primary safety
concern wherever they appear. Furthermore, a separate section has been included which deals
exclusively with operation and accident prevention.
If, after reviewing this manual, anything is unclear or technical problems are encountered, contact
the distributor from whom you purchased your machine for assistance. If there are any additional
questions, feel free to contact our Customer Service Department at the address and/or phone
number listed on the last page of this manual. Always have the model and serial number of your
machine available to assist in obtaining the correct information.
