Cretors MACH 5 M516 Series Скачать руководство пользователя страница 9

 

 

M5 16/32/48/60-M-A/E-O 

Created on 4/14/2011 8:18:00 AM 

BEGIN SERIAL NO. 09010131 

 

 

 
 
 
 
 

IX.   SANITATION INSTRUCTIONS 

 

 

Be certain the machine is turned off and power is unplugged before sanitizing this 
machine unless a specific cleaning procedure requires power to the machine.  Failure 
to do so could result in injury or death.

 

 

 

Do not clean heated surfaces until they have been given sufficient time to cool.  Failure 
to do so may result in serious burns or scalds.

 

 

 

A.

 

Popping Kettle 

 

1.

 

The Cretors kettle is designed to be cleaned in place.  There is no need to remove the 
kettle to clean.  
 

 

Do not immerse an assembled kettle in water.  This will damage the electrical 

components and my cause short circuits resulting in electrical shock hazard if power is 
applied.

 

 
2.

 

Do not use steel wool or other similar abrasives to clean the nickel plated kettles, as they 
will ruin the kettle by removing the nickel plating.  Stainless steel kettles can be cleaned 
aggressively. 
 

3.

 

Do not attempt to clean the kettle with power connected unless you are boiling the CKC 
cleaning compound to clean the inside of the kettle.  Follow the instructions in step 6. 

 

 

Do not attempt to clean a hot kettle.  Failure to do so may result in serious burns or 

scalds.

 

 

 

Do not throw ice into a hot kettle.  Doing so can cause damage to the pan and 

invalidate the warranty. 

 

4.

 

The kettle has a polished nickel finish or is a polished stainless steel finish and is very 
easy to clean if oil is not allowed to burn.  After the final popping, the best practice is to 
wait until the oil just begins to solidify, then take a cotton towel or absorbent rag and 
wipe the kettle.  Once the oil is allowed to completely solidify, it can become more 
difficult to remove.  We recommend coconut oil for your Cretors popper; it will not stick 
or burn as easily as other oils 

 
5.

 

A thorough cleaning every week with CKC cleaning compound is recommended.  This 
will prevent the accumulation of carbon on the bottom and internal sides of the kettle.  
When boiling the CKC cleaning compound in the kettle, do not fill the kettle with more 

Содержание MACH 5 M516 Series













Отзывы: