Crestron TPMC-9L, Руководство по эксплуатации и установке

Страница: 34 / 52

Isys
®
9” Wall Mount Touch Screen Crestron TPMC-9L
Attaching the Screws and Mounting Clips
Mounting Screws
(4) 6-AB x 2-1/2”
(2014276)
Mounting Clips
Thread Screws Through Clips At
This End
6. Connect the Cresnet cable, using the supplied mating connector, to the
Cresnet port; attach the Ethernet cable, if required. Attach video cables,
using the supplied mating connectors and position the TPMC-9L in the
mounting hole. Refer to “Hardware Hookup” which starts on page 31.
7. Tighten the mounting screws evenly and only enough to compress the
mounting clips and secure the TPMC-9L squarely in the mounting surface.
Do not over-tighten the screws.
Installing the Faceplate
Use the Crestron Engraver software package to obtain a custom-engraved faceplate
for the TPMC-9L. Install the faceplate as follows.
1. Carefully position the faceplate over the face of the touch screen.
2. Ensure that the faceplate is oriented properly and press against the
TPMC-9L until the faceplate snaps into place.
30
•
Isys
®
9” Wall Mount Touch Screen: TPMC-9L Operations & Installation Guide – DOC. 7030B