Isys
®
9” Wall Mount Touch Screen
Crestron
TPMC-9L
This screen performs a test of the TPMC-9L’s built-in microphone. The touch screen
records audio for five seconds and then plays back the recorded sound. Speak into
the microphone on the front of the TPMC-9L and the recording is played back to
confirm the microphone is functioning. When playback is finished, the display goes
back to the “Diagnostics” menu.
The
Calibrate Touch
button on the “Diagnostics” menu initiates touch screen
calibration, as does the
Calibrate
button on the Touch Test screen (refer to “Touch
Test Screen” illustration on page 22).
From the “Diagnostics” menu, touch
Return
to go back to the main “Setup” menu.
About
From the main “Setup” menu, touch
About
to display the firmware version and
operating system image version currently loaded on the TPMC-9L. Touch
Return
to
go back to the main “Setup” menu.
Display
From the main “Setup” menu, touch
Display
to enter the “Display Settings” screen,
shown in the illustration below.
“Display Settings” Screen
The “Display Settings” screen contains buttons for turning the TPMC-9L’s
Auto
Brightness Control
on or off, controls for pre-setting the
Screen Brightness Level –
HIGH
and
Screen Brightness Level – LOW
, as well as
HIGH
and
LOW
buttons for
instantly activating these presets. In addition, there are controls to set the
Sensor
Threshold
and a
Current Light Sensor Level
meter, like the one on the main
“Diagnostics” menu (refer to “Diagnostics” which starts on page 21), to indicate
ambient light level.
With the
Auto Brightness Control
set to
OFF
, the screen brightness is at the level set
by the
Screen Brightness
controls (which appear in place of the
Sensor Threshold
and
Current Light Sensor Level
meters, as shown in the illustration that follows).
24
•
Isys
®
9” Wall Mount Touch Screen: TPMC-9L
Operations & Installation Guide – DOC. 7030B
Содержание TPMC-9L
Страница 1: ...Crestron TPMC 9L Isys 9 WallMountTouchScreen Operations Installation Guide...
Страница 4: ......
