Crestron TPMC-10, Руководство по эксплуатации, Страница: 41 / 60

Crestron TPMC-10 Isys i/O
™
WiFi Touchpanel
VT Pro-e Objects and Signal Type Descriptions (continued)
VT Pro-e
OBJECT
VT Pro-e JOIN
DESCRIPTION
(SIGNAL TYPE)
DESCRIPTION
Open/Close Join
(Digital input)
Opens the embedded application when the input goes high.
When the input goes low, this closes the application.
High/1 (level sensitive) = Open application;
Low/0 = Close application
Analog Feedback
Join (Analog
outputs):
Left
Top
Width
Height
Reports the position and size of the window in pixels (1d =
one pixel) when the user opens the embedded application.
(The outputs do not report the position or size when sent by
the control system.)
If a Left join is defined, the output will report the number of
pixels from the left side of the window to the left edge of the
screen.
If a Top join is defined, the output will report the number of
pixels from the top of the window to the top edge of the
screen.
If a Height join is defined, the output will report the height of
the window.
If a Width join is defined, the output will report the width of the
window.
Analog Feedback
Join (Analog
input):
Open/Close
Selects the display mode for the embedded application. Valid
values are as follows:
2d = Show
4d = Hide
8d = Close
16d = Maximize
Embedded
Application
(continued)
Analog Feedback
Join (Analog
inputs):
Left
Top
Width
Height
Controls the position and size of the window as follows:
The Left join sets the number of pixels from the left side of the
window to the left edge of the screen. The Top join sets the
number of pixels from the top of the window to the top edge of
the screen.
Valid analog values for Left and Top range from 0d to
65535d, adjustable in increments of one pixel (1d =one pixel).
Values larger than the display size can be used to move the
application off the screen, thus hiding the application without
closing it.
Usable values will depend on the resolution of the
touchscreen. For example, for a touchscreen with 1024x768
resolution, usable values would range between 0d and 1024d
for Left; and 0d and 768d for Top.
The Width and Height joins set the width and height in pixels.
Valid analog values for Width and Height range from 0d to
65535d, adjustable in increments of one pixel (1d = one
pixel).
Usable values will depend on the resolution of the
touchscreen. For example, for a touchscreen with 1024x768
resolution, usable values would range between 0d and 1024d
for Width; and 0d and 768d for Height. Setting both the Width
and Height to 0d would hide the window.
(continued on next page)
Operations Guide – DOC. 6284B Isys i/O
™
WiFi Touchpanel: TPMC-10
•
37