Crestron TPMC-10 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 60

Crestron TPMC-10 Скачать руководство пользователя страница 14

Isys i/O

™

WiFi Touchpanel

Crestron

TPMC-10

Replacing the Battery

To replace the battery, slide the battery compartment latch up to the unlocked
position, and slide the battery out. Slide the replacement battery into the TPMC-10
until it snaps into position, and slide the latch into the locked position.

CAUTION:

Replace only with a TPMC-10 battery. To obtain a replacement battery,

please contact a Crestron customer service representative.

CAUTION:

Failure to fully charge the battery for five hours before turning on the

TPMC-10 for the first time may reduce the overall service life of the battery.

NOTE:

The TPMC-10’s battery “trickle” charges when the external power supply is

used to power the touchpanel.

NOTE:

If you are not using the TPMC-10 on a daily basis, store the unit by

connecting the power supply. For extended storage, remove the battery completely.

Configuring the Touchpanel

When power is applied to the unit for the first time, the following screen appears.

Initial Opening Window

Touching the

Setup

button with the stylus or your finger will display the TPMC-10

setup screen shown on the next page.

10

•

Isys i/O

™

WiFi Touchpanel: TPMC-10

Operations Guide - DOC. 6284B

«
...
12
13
14
15
16
...
»

Содержание TPMC-10





























































Отзывы:

Нет отзывов