Wall Mount 2-Way RF Compact Color Touchpanel Crestron
STX-1550CW
8
••
Wall Mount 2-Way RF Compact Color Touchpanel: STX-1550CW
Operations Guide - DOC. 5849
The touchpanel usually communicates with a Cresnet system. Occasionally the
touchpanel can be used in a local demo mode where it merely displays various
menus, but does not communicate with the Cresnet system. In local mode, the
directory buttons change pages, but buttons requiring feedback do not work. Two
buttons on the Interface Submenu,
CRESNET II
and
LOCAL
, determine
communication mode. Select
CRESNET II
for the normal Cresnet communication
mode and
LOCAL
to set the touchpanel into demo mode. Text within the selected
button changes color from black to red and the communication mode is factory set to
CRESNET II
.
RF Settings Screen
The
RF SETTINGS
button opens the RF SETTINGS screen, shown to the left. The
RF ID
is displayed in the RF SETTINGS screen. The RF ID must match the identity
code in the SIMPL Windows program and is identified by a hexadecimal number in
the range from 0 to F. In the diagram, the RF ID is shown with a setting of “1”. The
DOWN and UP buttons associated with the RF ID field decrease and increase the RF
ID by one, respectively.
The RF CHANNEL of the touchpanel
must be identical to the RF CHANNEL
of the STRFGWX to which it
communicates.
The
RF CHANNEL
is displayed in the RF SETTINGS screen. The RF CHANNEL
is identified by a hexadecimal number in the range from 0 to F. In the diagram, the
RF CHANNEL is shown with a setting of “0”. The
DOWN
and
UP
buttons
associated with the RF ID field decrease and increase the RF ID by one,
respectively.
The
TEST
button should only be used under supervision from a Crestron customer
service representative during telephone support. The options available from the
TEST Menu are beyond the scope of this guide.
Select the
RETURN
button after interface parameters have been set.
Sound Submenu
Sound Submenu
The
SOUND
button, located at the top right corner of the Setup Menu, is used to
display the Sound Menu, shown to the left. Use this screen to activate audible key
clicks. This feature is a useful feedback tool. Confirmation of a button press on a
touchpanel is acknowledged by an audible click assuming this feature is enabled. To
enable this feature, verify that the
KEYCLICK ON
button is active (red). An active
KEYCLICK OFF
button disables the feature. Volume of the audible click is
controlled with the
VOLUME UP
and
VOLUME DOWN
buttons. The unit is
factory set with the sound on.
Contrast Buttons
Screen contrast may need to be altered because of ambient light conditions, panel
temperature, or personal preference. Two contrast buttons,
CONT <<
and
CONT >>,
on the Setup Menu may be held down for continuous adjustment of the
screen.
Brightness Buttons
Screen brightness may need to be altered because of ambient light conditions or
personal preference. Three brightness buttons,
BRT LOW
,
BRT MED
, and
BRT
HI
, on the Setup Menu may be selected to assign the backlight setting.
