Crestron RACK2, Руководство по эксплуатации

Страница: 19 / 52

Crestron RACK2 2-Series Card Cage System
The default Date/Time Menu, shown after this paragraph, permits alterations to the
current system date and time shown on the top line. Select either Date or Time to
open the respective submenu.
Default Date/Time Menu
The Date Set submenu, shown after this paragraph, permits alterations to the current
system date, shown on the top line. Use the Dn (down) and Up selection buttons for
month, day, and year decremental or incremental changes, respectively.
Date Set Submenu
The Time Set submenu, shown after this paragraph, permits alterations to the current
system time, shown on the top line. Use the Dn (down) and Up selection buttons for
hour and minute (Min) decremental or incremental changes, respectively. The
AM/PM selection button toggles between AM and PM.
Time Set Submenu
COM
This button allows the user to monitor the transmission and reception traffic on a
COM-type device and card that is active in the SIMPL Windows program that is
loaded into the 2-Series control system. This includes all devices connected via
Cresnet (e.g. ST-COM) and Ethernet (e.g. CEN-COM) and cards inserted into the
expansion slots (e.g. C2COM-3). Serial transmission to IR ports can also be
monitored. Refer to "COM Analyzer" on page 42 for details.
NOTE: Only COM-type devices and cards in the SIMPL Windows program that are
active (not commented out) are monitored.
Operation Guide – DOC. 5958 2-Series Card Cage System: RACK2
•
15