Crestron RACK2 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 52

Crestron RACK2 Скачать руководство пользователя страница 17

Crestron

RACK2

2-Series Card Cage System

BKLT

This button adjusts the brightness of the LCD backlight and the front panel LEDs.

Menu Function Buttons

PANEL

NOTE:

If the unit does not have a loaded program with front panel screens defined,

the PANEL menu function does not appear on the Main Menu.

This menu function button displays a programmable interface offering command
text, indirect text, and hierarchical screen structure. The menu contents are subject to
programming and an example of this display is provided in "Programming the LCD
Screen" on page 34.

INFO

This button displays a default Info Menu, shown in the following figure. System
information, including the loaded SIMPL program version (Rems), hardware specs
such as types of expansion cards installed in the card slots (HWare), the Cresnet
devices detected (Net), the Ops version (Ops), and the communication settings
(Com), is displayed.

While the COM menu is displayed, press the or menu selection buttons to
change the system baud rate.

NOTE:

The information within each of the commands displayed in the Info Menu

may exceed the 40 characters permitted per line. If this occurs, use the two right-
most menu function buttons to scroll left and right. Refer to the two arrows shown
beneath the Info Menu illustrated after this note for location and identification.

Default Info Menu

MSG

This button displays a list (error log) of the most recent errors. Error messages may
be the result of hardware or software failure, hardware incompatibility with software
definitions, or a programming error.

NOTE:

Loss of power may cause the error log to clear.

The following table lists and defines the four types of error messages that may
appear.

Operation Guide – DOC. 5958

2-Series Card Cage System: RACK2

•

13

«
...
15
16
17
18
19
...
»

Содержание RACK2





















































Отзывы:

Нет отзывов