Crestron QM-WMIC, Руководство по эксплуатации и установке

Страница: 8 / 32

Wall Plate Media Center Microphone Input Crestron QM-WMIC
Specifications for QM-WMIC (continued)
SPECIFICATION DETAILS
Microphone (continued)
Input
Impedance
XLR: 10 k
Ω
¼”: 4 k Ω balanced
2 k Ω unbalanced
Level Monitoring Provided for setup purposes.
Nominal indication at 20 dB
below input clip level. Clip
indication reported at 6 dB below
input clip level.
Noise Gate Software enabled noise gating
with adjustable level, attack time,
and decay time (variable from 10
ms to 5 seconds).
Phantom Power (XLR only)
Voltage
Current
Source
Impedance
Software enabled
3
48 V
10 mA (combined total)
3.4 k
Ω
Operating Temperature and
Humidity 41º to 104º F (5º to 40º C)
10 to 90% relative humidity
(non-condensing)
Dimensions and Weight Width: 1.77 in (4.49 cm)
Height: 4.11 in (10.44 cm)
Depth: 2.14 in (5.43 cm)
Weight: 4.1 oz (0.12 kg)
1. The latest software versions can be obtained from the Downloads | Software
Updates section of the Crestron website ( www.crestron.com ). Refer to the
NOTE following these footnotes.
2. Crestron 2-Series control systems include the AV2, C2N-DVP4DI,
CP2, CP2E, MC2E, MC2W, MP2, MP2E, PAC2, PRO2, QM-RMCRX, and
RACK2.
3. Phantom power is applied to the XLR connectors of both microphone inputs.
It cannot be enabled on an individual microphone input.
NOTE : Crestron software and any files on the website are for Authorized
Crestron dealers and Crestron Authorized Independent Programmers
(CAIP) only. New users may be required to register to obtain access to
certain areas of the site (including the FTP site).
4
•
Wall Plate Media Center Microphone Input: QM-WMIC Operations & Installation Guide - DOC. 6245