Crestron QM-WMIC, Руководство по эксплуатации и установке

Страница: 14 / 32

Wall Plate Media Center Microphone Input Crestron QM-WMIC
6. Connect the network and QuickMedia cables to the rear of the
QM-WMC.
7. Make sure the QM-WMC and QM-WMIC are properly
oriented (labels are upright), and place it in the electrical box.
CAUTION: Excess wire that is pinched between the wall plate and
electrical box could short out. Make sure that all excess wire is
completely inside the electrical box and not between the box and the wall
plate.
8. Attach the wall plate to the electrical box using the supplied ¾”
pan-head screws as shown in the following diagram.
Install Wall Plate into Wall Box
3-GANG ELECTRICAL BOX -
2
1
2
INCH MINIMUM DEPTH
(NOT SUPPLIED)
QM-WMIC MUST BE MOUNTED TO THE
RIGHT OF THE QM-WMC
6-32 X
3
4
INCH PAN HEAD SCREW (SUPPLIED)
TO MOUNT TO ELECTRICAL BOX
9. Attach an appropriate Decora (or equivalent, not supplied)
faceplate.
10. Turn Cresnet system power ON .
10
•
Wall Plate Media Center Microphone Input: QM-WMIC Operations & Installation Guide - DOC. 6245