Crestron Isys TPS-3000, Руководство по эксплуатации

Страница: 29 / 48

Crestron Isys
®
TPS-3000 6.4 Inch Tilt Touchpanel
NOTE: This procedure sets the Net ID for the TPS-3000 in the program only. It
does not automatically set the Net ID for the TPS-3000 itself. SIMPL Windows
automatically changes Net ID values of a device added to a program if a duplicate
device or a device with the same Net ID already exists in the program. Always
ensure that the hardware and software settings of the Net ID match. For Net ID
hardware settings details, refer to “Interface Menu” on page 12.
TPS-3000 Symbol in Programming Manager
Programming Manager is where programmers “program” a Creston control system
by assigning signals to symbols. The following diagram shows the TPS-3000 symbol
in the SIMPL Windows’ Programming Manager.
Detail View of the TPS-3000 in SIMPL Windows’ Programming Manager
NOTE: Pin numbers are expandable to 4000 Digital, 4000 Analog, and 999 Serial.
Signal Types
Signals interconnect the various devices and logic symbols that comprise a SIMPL
program. Signals can be one of three types: digital, analog, or serial. For any given
signal, the signal type is determined by its driving source. That is, if the symbol that
drives the signal has an analog output, then, by definition, the connecting signal is
analog.
In SIMPL Windows, the signal types are color-coded as follows:
Digital = Blue
Analog = Red
Serial = Black
Other = Green
Operations Guide – DOC. 6076A 6.4 Inch Tilt Touchpanel: Crestron Isys
®
TPS-3000
•
25