Crestron Isys TPS-3000, Руководство по эксплуатации

Страница: 19 / 48

Crestron Isys
®
TPS-3000 6.4 Inch Tilt Touchpanel
Timeout Menu
The touchpanel display can be turned off (standby mode) when not in active use.
Select the
Timeout button on the SETUP MENU to reveal the TIMEOUT
SETTINGS display, shown below. This setting turns the display off when the
touchpanel is inactive for a specified time. Touch the screen to awaken the
touchpanel and the last screen to be displayed reappears. The time value, represented
by XXX in the illustration, can range from 0 (disables the timeout) to 120 (minutes).
Two buttons,
UP and DOWN , increase and decrease the timeout, respectively.
Select the Return button to save the timeout setting and return to the SETUP
MENU.
TIMEOUT SETTINGS
RS-232 Menu
The touchpanel allows for one of four RS-232 communication modes: console (i.e.
loading programs) control (i.e. non-Crestron device), touch output (communication
of touch coordinates to an external device) or external touch screen input.
For convenience, the RS-232 Menu also permits the selection of the RS-232
communication options, RTS-CTS On, RTS-CTS Off, XON-XOFF On, XON-XOFF
Off, Baud Rate, Data Bits, Parity, and Stop Bits.
Touch the communication option to select communication parameters and then select
Save and Return to save the RS-232 settings and return to the SETUP MENU.
Default settings: Console mode, Baud rate: 115200, data bits: 8 bit, parity: none, stop
bit: 1, XON/XOFF on, RTS/CTS off.
RS-232 SETTINGS
Operations Guide – DOC. 6076A 6.4 Inch Tilt Touchpanel: Crestron Isys
®
TPS-3000
•
15