Crestron Isys TPS-1700, Руководство по эксплуатации

Страница: 6 / 36

Isys
®
Wired 5.7 Inch Tabletop Touchpanel Crestron TPS-1700
2
•
Isys
®
Wired 5.7 Inch Tabletop Touchpanel: TPS-1700 Operations Guide - DOC. 6223A
Specifications
The table below provides a summary of specifications for the TPS-1700.
Specifications of the TPS-1700 Touchpanel
SPECIFICATION DETAILS
Power Requirements 10 Watts (0.40 Amp @ 24 VDC)
Default Net ID 03
Default Standby Timeout 10 minutes
Signal Join Maximums 4K (digital), 4K (analog), 999 (serial)
Control System Update Files
1
2-Series Control System
CEN/CN-TVAV
CNMSX-AV/Pro
CNRACKX/-DP
CNMS, CNRACK, CNLCOMP
ST-CP
Version C2-2004.CUZ or later
2
Version 5.13.12V.UPZ or later
3, 4
Version 5.12.63X.UPZ or later
3, 4
Version 5.10.11W.UPZ or later
3, 4
Version 3.18.09m, l, c or later
5
Version 4.02.04S.UPZ or later
3
Acceptable File Extensions
6
VT Pro-e
.vtp
.vtz
Firmware
.csf
projectname
.vtp (source file)
projectname .vtz (compiled file)
TPS-1700xxxxxx.csf (panel firmware)
Memory 4 MB flash memory (3.5 Mbytes available
for user programming)
8 MB SDRAM for firmware storage
Touchscreen Dimensions Height: 3.50 in (8.89 cm)
Width: 4.60 in (11.68 cm)
Diagonal: 5.70 in (14.48 cm)
Touchscreen Resolution 320 x 240 pixels, 64K colors (16-bit)
Touchscreen Viewing Angles ±65° for X dir, +65°/-40° for Y dir
Touchscreen LCD Active matrix
Touchscreen Illumination Backlit fluorescent
Touchscreen Composition Resistive Membrane
Operating Temperature 50° to 113°F (10° to 45°C)
Humidity 10% to 90% RH (non-condensing)
Overall Dimensions Width: 8.75 in (22.22 cm)
Height: 3.85 in (9.78 cm)
Depth: 5.51 in (14.00 cm)
Weight 1.85 lb (0.84 kg)
1. The latest versions can be obtained from the Downloads | Software Updates section of the Crestron
website (
www.crestron.com) . Refer to NOTE after last footnote.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
3. CNX update files are required for either CNMSX-AV/PRO or CNRACKX/-DP. Filenames for CNX
update files have a UPZ extension and are in one EXE or zipped UPZ file. To avoid program problems,
make certain you are using the update file with the correct suffix letter (e.g., S, V, W, X).
4. When loading touchpanel projects or firmware through the RS-232 port of the control system,
Viewport may post the “Transfer Failed” message. To ensure successful data transfer, set the baud rate
to 38400 (Cresnet speed) or lower.
5. These control systems do not support file transfers (firmware or touchpanel projects) over Cresnet. File
transfers must be directly uploaded through the RS-232 port.
6. Extension requires a prefix specific to the touchpanel type. In DETAILS, projectname represents the
assigned project name, and xxxxxx represents a version number.