Crestron Isys TPS-1700, Руководство по эксплуатации

Страница: 24 / 36

Isys
®
Wired 5.7 Inch Tabletop Touchpanel Crestron TPS-1700
20
•
Isys
®
Wired 5.7 Inch Tabletop Touchpanel: TPS-1700 Operations Guide - DOC. 6223A
Settings” window are selected as shown after this step. Click the OK
button to save the settings and close the window.
“Port Settings” Window
4. To verify communication, select Diagnostics | Establish
Communications (Find Rack) . This should display a window that
gives the COM port and baud rate. If communication cannot be
established, refer to the “Troubleshooting Communications” section in
the respective Operations Guide for the control system.
Uploading a SIMPL Windows Program
A control system source file has
the extension .smw. A compiled
SIMPL Windows file has the
extension .spz for a 2-Series
control system, .bin for CNX
generation, and .csz for CNX
generation with SIMPL+.
The SIMPL Windows file can be uploaded to the control using SIMPL Windows or
via the Crestron Viewport.
Upload via SIMPL Windows
1. Start SIMPL Windows.
2. Select File | Open to view the “Open” window, navigate to the SIMPL
Window file (.smw), and click Open .
3. Select Project | Transfer Program .
Upload via Crestron Viewport
1. Verify that the procedure for “Communication Settings” that begins on
page 18 has been performed.
2. As shown after this step, select File Transfer | Send Program
(alternatively, press Alt+P ) from the Viewport menu.