Crestron e-Schedule, Руководство программиста

Страница: 30 / 53

Crestron e-Schedule Programmer’s Guide
Connections
The Current Connections area of the Connections tab lists the IP
Addresses of all hardware devices that are configured to run with the Real-
Time Engine. Each field also displays the connection status and CNX
Gateway connection handle, for debugging purposes.
Check for new connections every ‘n’ seconds —since set-top boxes and
browsers are likely to be dynamically connected and disconnected to the
system at any time, the Real-Time Engine will continuously poll all hardware
at the specified interval, to make sure a connection is active and valid. (See
NOTE, below.)
NOTE : Crestron recommends using the default settings for periodic system
checks, as lengthening or shortening the time interval may adversely affect
system response.
Programmer’s Guide e-Schedule – DOC. 5919
•
28