Crestron DM-RMC-200-S, Руководство по эксплуатации и установке

Страница: 28 / 44

DigitalMedia 8G Fiber Receiver 200 Crestron DM-RMC-200-S/S2
22

DigitalMedia 8G Fiber Receiver 200: DM-RMC-200-S/S2 Operations & Installation Guide – DOC. 7246B
Hardware Connections for the DM-RMC-200-S/DM-RMC-200-S2 (Bottom Panel)
HDMI OUT:
Digital Video/
Audio Output
USB HID:
From USB
HID-Compliant
Device
COM:
To RS-232
Device
DIG IN:
Software
Programmable
Digital Input
IR:
To IR
Controllable
Device
Hardware Connections for the DM-RMC-200-S/DM-RMC-200-S2 (Rear Panel)
Ground
RELAY 1-2:
To
Controllable
Devices
AUDIO OUT L, R
(SPEAKER):
Amplified Stereo
Audio Output
DIG IN:
Software
Programmable
Digital Input
NOTE: Ensure that the unit is properly grounded by connecting the chassis ground
lug to an earth ground (building steel).
NOTE: Do not connect the set of speaker level audio outputs on the top panel and
the set of speaker level audio outputs on the rear panel simultaneously. Only one set
of speaker level audio outputs can be used at one time.
NOTE: For optimum performance, Crestron recommends using CresFiber 8G fiber
optic cable for the DM-RMC-200-S and CresFiber 8G SM fiber optic cable for the
DM-RMC-200-S2.
NOTE: Fiber optic cable connectors and cable ends should be protected from
contamination and scratching at all times. When cable is not connected, protect the
optical receiver on the DM receiver by using the included cap. Fiber ends should be
handled carefully and the cable should not be bent or coiled tightly.