Crestron DM-RMC-200-S, Руководство по эксплуатации и установке

Страница: 21 / 44

Crestron DM-RMC-200-S/S2 DigitalMedia 8G Fiber Receiver 200
Connectors, Controls & Indicators (Continued)
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
8 AUDIO OUT R, L
(Line)
(2) RCA female;
Stereo unbalanced line level audio
output;
Output Level: 2 V
rms
maximum
Output Impedance: 100 ohms nominal
9 DM IN MMF/SC (DM-RMC-200-S only)
(1) SC female optical fiber connector;
DM 8G fiber input;
Connects to DM 8G fiber output of a DM
switcher, transmitter, or other DM device
via CresFiber 8G multimode fiber optic
cable
3
10 DM IN LED (1) Green LED, indicates DM link status
11 LAN
Green
LED
Amber
LED
Pin 8 Pin 1
(1) 8-pin RJ-45 female, shielded, with
two LED indicators;
10BASE-T/100BASE-TX Ethernet port;
Green LED indicates Ethernet link status;
Amber LED indicates Ethernet activity
PIN SIGNAL PIN SIGNAL
1 TX + 5 N/C
2 TX - 6 RX -
3 RX + 7 N/C
4 N/C 8 N/C
12 24 V
2.0A MAX
(1) 2.1 x 5.5 mm dc power connector;
24 volt dc power input;
Power pack included
13 DM IN SMF/LC (DM-RMC-200-S2 only)
(1) LC female optical fiber connector;
DM 8G single-mode fiber input;
Connects to DM 8G SMF output of a DM
switcher, transmitter, or other DM device
via CresFiber 8G SM single-mode fiber
optic cable
3
14 DIG IN
S G
(1) 2-pin 3.5 mm detachable terminal
block;
Digital/contact closure sensing input;
Rated for 0-24 volts dc, referenced
to GND;
Input Impedance: 2.2k ohms pulled up to
5 volts dc;
Logic Threshold: 2.5 volts dc nominal
with 1 volt hysteresis band
15 HDMI OUT (1) 19-pin Type A HDMI female;
HDMI digital video/audio output;
Also supports DVI
4
16 USB HID (1) USB Type A female;
USB 2.0 host port for connection of a
mouse/keyboard or other USB
HID-compliant device
(Continued on following page)
Operations & Installation Guide – DOC. 7246B DigitalMedia 8G Fiber Receiver 200: DM-RMC-200-S/S2

15